Tag Archives: “stan pike”

SP 22664

Simon Jones contacted me and said…

I have a bike I’ve recently bought. It’s badged as a Bob Addy. He had bikes made by other makers to sell through his shop. The frame number is SP 22664 with the word DRAYCOTT, both under the BB. The lugs look very similar to SP 25332 but without the cloverleaf cutouts. The drop outs are campagnolo with a Gipiemme brake bridge. Components include Campag nuovo record PAT.83 rear with record downtube shifters. Cinelli R1 stem and bars. Dura ace seat post. Modolo black professional calipers. I’ve seen on the internet that Stan Pike built frames for other shops. Do you think he might of made my bike frame?

As you can see, the brake levers are not correct, but look better than what was on there when I bought it. Also the saddle and front mech I’ve replaced with parts I’d got on another bike. The photo of the rear mech shows the dropout with 2 holes for a Portacatena and no holes for mudguards, so the bike was presumably built for racing. The rims and hubs look good so I’ll respoke the wheels. I hope the photos are good enough for the website.

bobaddy1bobaddy2bobaddy4

I forwarded photos to Stan’s son, who replied…

I know this one and knew from the pictures it was a Stan Pike, you can tell from the feathering on the lugs, no one else would bother to spend the time perfecting them! Built in Sept 1983. It’s a 23″ frame, built from Reynolds 531 double butted tubing for Bob Addy.

As it was built in Sept 1983, it means it was one of the last Stan built before his death in November 1983.

Now living in Australia, Bob Addy is very busy as a professional cycling coach. He has a hugely impressive list of achievements – amongst other things Bob is a former British Road Champion, Australia vets Road, Criterium and Time trial Champion, and has ridden in the Tour de France, Olympics games and Commonwealth games. See his website here. I emailed Bob in the hope that he might have some Stan Pike related information. He said…

Yes, this is a Stan Pike frame and I don’t mind it going on the website. My father had a TT bike made by Stan, low profile which I still have in the garage. I will try and get a photo of it over to you within the next few weeks.

Fingers crossed Bob will supply me with more detailed information and photographs. I’ll update the page if so.

SP 2163

Trevor Harrison contacted me about his Stan Pike and said…

I own a Stan Pike frame. Bought from Alltrax Cycles in Plymouth, I have tried to trace information on the original owner for some time. It’s a very light frame and a fast ride. Some details for you:

Reynolds 753 tubing – 21″ time trial frame
Powder blue with gold lug lining
Original riders name in gold on op tube – CR Sweet
Bottom bracket is stamped ‘Christopher Sweet’  SP 2163
Campag Super Record 52/42 Chainset
Super Record pedals
Nuovo record seat post and shifters/headset/front and rear mechs
Cinelli bars and stem
Ambrosio Sprint wheels + tubular tyres
Campag Record hubs
Regina CXS 14-24 freewheel
Reg Bottle cage
Leather saddle

IMG_6286
Trevor Harrison with his Stan Pike

IMG_6287

I contacted Alltrax Cycles and received some further information from John Benney. He said…

Here are some more pictures of the bike as it was when I purchased it from Mr Alan Cox who was the second owner of the bike having bought it from Mr Sweet of Plymouth. At the time of having the bike in the shop for sale I managed to trace Mr Sweet, he came to the shop to see the bike, unfortunately I was out at the time so did not get to meet him, but he did leave a contact phone number. I still have the receipt from Mr Sweet confirming the sale to Mr Alan Cox for £350 for the complete bike. Trevor Harrison bought the frame & forks from me as I striped the bike down & sold all the Campag Super Record parts separately.

Here are some of John’s photos…IMG_5893 copy IMG_5908 copyb 5913 copy 3a DSC01471 DSC01478 DSC01479 DSC01480 DSC01481-1

SP 8309

Type ‘Stan Pike’ into Google and one of the top results is the Classic Rendezvous website – a great site ‘dedicated to Lightweight Vintage Bicycles, circa 1900~1983’. I noticed that on the Stan Pike page, that there are images of a Pike owned by Wayne Bingham. It wasn’t difficult to track down Wayne – he owns Velo Classique – a bicycle shop that specializes in vintage and classically styled bicycles, parts and accessories in Purcellville, Virginia, USA. A quick email to Wayne prompted this reply…

You have, indeed, found the right person. And I do still have my Stan Pike, and have owned it for almost 20 years now. It’s actually one of the most prized bikes in my collection. In fact, it is the bike that started me down the path of being a “collector”, instead of a guy who primarily just bought and sold bikes so that I could have and ride nice bikes. My frame has been built up several different ways since I’ve owned it. The latest build was done several years ago to showcase some modified components done by a friend of mine in Oregon (Jon Williams at Drillium Revival). I’m attaching a couple of pictures of the latest configuration.

18239925202_02ec8696a2_k

I first found the Pike I own through a friend who managed a local bike shop, after someone brought it in to the shop and tried to trade it on another bike. My friend, knowing my affinity for classic bikes, sent them to me. It turned out that the original owner had died and his sister and her husband inherited the bike. The bike didn’t fit either of them, so they were trying trade it. I ended up building up a commuter bike for the husband, and got the Pike in trade.

18243678695_70a262efde_o 18239927042_df33409bf0_k

Although I thought I knew a lot about bikes, I had never heard of Stan Pike. I did, however, recognize a very finely crafted and beautiful frame when I saw one. I set about trying to learn more about it, and asked anyone I met about it, but seemingly no one else knew of Stan Pike either. I owned it for a number of years before I met the first person who had ever seen one, that being Dale Brown who created the Classic Rendezvous web site. Sometime later, and prompted by me, Dale put what information we knew on the Classic Rendezvous web site.  Stan’s son, Steve, contacted us and was kind enough to not only give us the correct story (essentially the one you have on your site now), but he also provided me copies of the original built and journal entry for my frame, #SP 8309, built in February 1983, just nine months before Stan’s death. Shortly after that, I came to know Hilary Stone, who related the info you also now have on your site. So as you can see, I’ve been a champion of Stan Pike here in the US for a long time. Interestingly, my frame was not built for a customer as most were, rather it was one of three consecutive frames build for “stock”. My frame appears to be even more finely finished that most others I’ve seen, and it is Hilary’s opinion that this frame and possibility the two other consecutive ones were likely built for show purposes.

Click below to find out more about Wayne’s shop, Velo Classique:

Velo Classique Flickr pages

Velo Classique Facebook

www.veloclassique.com

18055934720_9b20d28837_k 18055931470_78fdc70859_k spike build sht spike log notes

PJ 78673

I was contacted by Steve Welch who said…

I have a very late 1983 Stan Pike, that I’m ashamed to report has hardly ever been ridden.There are a few hairline crazed cracks in the paintwork at the base of the forks, but not bad considering it has been hung on the garage wall for the last ten years. At the time of ordering it I was suffering from a running injury and my mate Dave Smith (Somerset Road Club) convinced me to get a Pike and take up cycling. I never did, and still run! On hearing of Stan’s death I was worried I might not get my new frame, but I was lucky.

Dave built the bike for me using bits from my previous crashed bike, so it really was a cheap bike. At the time, fluorescent paint was new and it really did stand out the few times I actually rode it!

I had my phone number in Taunton stamped on the frame (PJ 78673) as well as my name. Is this frame one of Stan’s last? I’d love to know.

I contacted Stan’s son, who replied…

Yes, I have the record for this one, it was finished by Phil and yes was one of the last. It’s a 23 & 1/2″ frame built for Stephen Welch and was the last one built in Oct 1983. Phil went on to build three more on his own in November 1983. Another twenty-six were then built by Phil in 1984 before the shop was closed.

IMG_0504 IMG_0500 IMG_0499

Stan Pike jerseys

I was contacted a few days ago by Barry Dobson, as both he and Chris Davey are riding in this year’s L’Eroica Britannia and L’Eroica Italia. They’d been discussing the idea of getting some Stan Pike merino knitted vintage-style jerseys produced so that they look the part.

Before proceeding we’d obviously need permission from Stan’s family to use the Stan Pike name and logo. The wheels were set in motion. I contacted Stan’s son. He liked the idea and sent me photos of what we think is the last remaining long-sleeved jersey.

DSC_0015

Original Stan Pike long-sleeved jersey
Original Stan Pike long-sleeved jersey

I mocked up a new design based on Jura Cycle Clothing’s short-sleeved jersey and sent it to Stan’s son for approval. He liked a lot and is happy for us to produce a very limited, not-for-profit, run.

If you’re interested in getting your hands on a jersey, please click here to view the SHOP page.

front

PJ 25353

I was contacted by Robin Evans who said…

I bought my Pike of Crewkerne in January 2015 on Ebay for£214.00. My interest was piqued by the fact that I grew up not far from Crewkerne. I then found the excellent Stan Pike Website and thoroughly enjoyed learning about the history of this particular family business. I gave James (who is the founder of the website) the frame number and he sent it off to Steve Pike, Stan Pike’s son, to see if he could shed some light on it. The bottom bracket has a name and a date of birth on it. Steve sent the following information back concerning this specific bike:

The frame number is PJ 25353 hence it took a while to find it. It was built in Feb 1983 by Philip Pike for Judy Windwood and supplied through Graham Tomlinson (a dealer in Wellington)
The spec is 22 1/2″ frame size with 22 1/4″ top tube, 14 3/8 wheel clearance. Top tube and seat tube angles are 73 degrees parallel.
The transfer set should be “Pike of Crewkerne”

James then managed to track down the very same Judy Windwood via the Web and her present connection with the Dorset Cyclists’ Network (DCN). I gave her a call and she kindly agreed to share some of her memories of this bike:

The bike was specifically built and assembled for Judy – 5′ 8″ but with small feet!

Judy has subsequently written to me, and sent photos of the bike:

“As far as we remember, we ordered the bikes after our daughter was born, so after May 1983. We might have contacted Stan in February but I remember going to Crewkerne with my daughter in my arms. The frames were finished before Stan’s death in November 1983 and Graham Tomlinson completed the bikes for us to my husband’s specification. We bought a bike each; my husband’s was red and mine the blue one. (see photos attached) Paul’s eventually wore out as he used it for everything when he wasn’t riding the tandem with a child on the back. He still has the forks though”

The bike was regularly used to carry their daughter in a bike seat. This was later superseded by a hand built trailer with a single wheel. This was constructed by Hannington’s of Reading.  Judy enjoyed doing 100K Audax events with a child on board! The bike was also regularly used for touring, commuting and shopping.

Judy's bike when brand new!
Judy’s bike when brand new!
Judy's husband's bike.
Judy’s husband’s bike.

Judy also added the following:

“My parents were instrumental, with Graham Tomlinson and Terry Manuel, in reforming the Wellington Wheelers in the mid 1980s. We rode with the club sometimes when we were staying with them. See also Charlie Rimmer’s Pike. I think it was the connection with the club which lead to us deciding to have the bikes built for us in Stan’s workshop, as both Terry and Graham knew Stan. Also, I struggled to find a suitable bike for me. There were few decent bikes available off the peg which would fit me so we decided on having bikes built for us which would take child seats and also could be used for touring.”

Judy with the newly bought trailer bike and her son, then aged five. 1988.
Judy with the newly bought trailer bike and her son, then aged five. 1988.
Judy with her daughter
Judy with her daughter
Judy's bike as a solo again, after the children had outgrown the trailer bike and tandem conversion.  It was taken at Corfe Castle on the ride to launch the Purbeck Cycleway in 1995.  47 miles.
Judy’s bike as a solo again, after the children had outgrown the trailer bike and tandem conversion. It was taken at Corfe Castle on the ride to launch the Purbeck Cycleway in 1995. 47 miles.

Judy eventually decided to sell the bike in 2014 when it needed a fair bit of TLC and after many years of loyal service. Judy continues to cycle and is still a very keen tandem rider. Her mum who is in her 80’s also continues to enjoy cycling on her electric bike

What is the next chapter for this particular bike bike? I have sorted it out mechanically and it rides beautifully. I have made it look nice without trying to sort out any scratches. I wanted to keep it authentic. I was going to ride L’Eroica on it but I fear it is a tad small for my 5’11 frame. So come the spring I shall reluctantly launch it on it’s next phase of ownership – probably via Ebay. These very well made Pike bikes were built to last!

stan pike 010 stan pike 009 stan pike 008 stan pike 007 stan pike 006 stan pike 005 stan pike 004 stan pike 003

FB 7620

I was contacted by Clive Crossey who said…

I have a Stan Pike frame, with the number FB 7620, which was built for me towards the end of 1974.

I raced on this bike with Velo Club Bristol from 1975 until 1985 when I crashed  on Stinchcombe Hill in the Dursley Road Race. After 1985 I used the bike to keep fit. Since 2001 it was unused and stored in the roof of my garage until late last year when I decided it needed a respray and clean.

This was the second frame I had built by Stan. The other was built in about 1973 and sold to Steve Roberts of Velo Club Bristol.  I don’t know the frame number, but it was probably an FB number again as I dealt with Stan through Pete Kettle at Fred Baker Cycles.

  • Tubing is 531SL
  • 74 degree seat and head angle
  • 21.75 top tube
  • 22.25 seat tube
  • Cinelli Giro d’Italia bars
  • Cinelli 1R stem
  • Cinelli Unicanito saddle with alloy rails
  • Campagnolo Record and Super Record gears, brakes and chainset
  • Regina CX Freewheel
  • Mavic GP4 rims

WP_20150303_15_56_07_Pro WP_20150303_15_57_04_Pro WP_20150306_001 WP_20150306_002 WP_20150306_003 WP_20150306_004 WP_20150306_007

SA 12

I was contacted by Mike Short from Austin, Texas, USA. He has recently purchased a Stan Pike, frame number SA 12, and says…

Here are some photos of the Pike. It is a bit rough and unfortunately someone added seat tube water bottle mounts. These appear to be a threaded sleeve in which the M5 allen screws go. I would consider a re-spray and have the holes filled, however I don’t think the “Pike of Crewkerne” decals are available. I have also noticed that the head tube decal is different from the regular “SP” decal – the border is different. So since I cannot get these decals I might just leave everything alone.

 SP7

The frame has a Campagnolo headset and a Campagnolo 27.2 seatpost. Bottom bracket is Sugino as are the cranks. It is set up as a triple with a Suntour Cyclone GT rear derailleur and a Suntour front derailleur. Freewheel is Suntour, hubs Normandy with Super Champion clincher rims. Pedals are Lyotard, SR stem with Nitto Olympiade bars and a Weinmann brakeset.

SP6

I have since stripped the frame down and found a matching SA12 stamp on the steerer tube. No rifling so it appears to be a 531 fork. I will get a photo of the steerer some time soon.

SP12

The frame is beautifully built with extremely clean crisp lugs which were also beautifully thinned, a really lovely frame. I asked the owner about it’s history and he says that he was told that the frame (not sure if this was a complete bike) was imported by Bill Lewis Imports here in central Texas. Bill Lewis sourced good quality frames from Italy (Tommasini, Zullo, Picchio etc) and up to this point I had never heard about him importing frames from the UK.

SP4 SP3

PikeDecals6 PikeDecals5 PikeDecals4 PikeDecals3 PikeDecals2 PikeDecals1

Stan Pike’s at Eroica Britannia

We’re hoping to gather as many Stan Pike’s together at this year’s Eroica Britannia – The Great British Adventure –  from 19-21 June 2015.

Screen Shot 2015-01-28 at 13.30.55

If you haven’t heard of Eroica Britannia, it’s a three day festival of cycling in the beautiful Peak District. There are three rides to choose from (30, 55 and 100) – all for pre 1987 bikes only.

But it’s not all about the rides, there is fun for all the family. Three days of live music, entertainment, acres of shopping, the World’s biggest Bike Jumble and a Food Festival.

Last year’s event got brilliant reviews, and this year’s event looks set to be even better. So if you’re thinking about taking part (on a Stan Pike), please get in touch through the Contact Form. It would be fantastic to meet up for a chat and a Stan Pike photo opportunity.

Was Chris Davey (below) the only rider on a Stan Pike in 2014?

Bq2Ln7pCUAAF8MC

By the way, tickets are said to be selling like hot cakes. Don’t delay, buy today!

eroicabritannia.co.uk

twitter.com/eroicabritannia

SP 4136

Robin Darch got in touch through the contact form and said…

I was about thirteen or fourteen when I started getting interested in cycling, starting off on an Eddy Merckx from Halfords. After a while I was lucky enough to get my hands on a Stan Pike (SP 4136). It was purchased from Ken Prescott Cycles of Southbourne in about 1983 or 1984. This really was a great bike and I suppose still is. I time trialled with Poole Wheelers making quite good progress in my first season – clocking 25.34 on the 10 mile.

Alas with one thing and another, mopeds, work etc, I never carried on with the time trials, which I suppose is a regret. I would’ve liked to know how good I could’ve become.

SP 4136 was still used, even taking a journey to Crewkerne to visit the shop. Alas it was shut on the Saturday I cycled from Poole to Crewkerne.

image1

I had started to refurbish the bike to bring it back to life, as it’s been hung in the garage for the last decade or so, preferring mountain biking to road use.

A few years ago, whilst watching the Tour of Britain pass through Crewkerne, I met Steve Pike outside the bike shop. I was admiring one in the window. Steve kindly offered the information (see below) which I’m passing on.

20150108_00001-2

20150108_00001-1
A copy of Stan Pike’s frame building record from January 1981

Thanks for the site which has pushed me into getting some motivation to get it back on the road.

The bike is mainly made up of Shimano 600 with a Dura Ace front mech. It did have the matching rear, but falling off it no longer. Mavic Monthlery Route sprint rims.

Just need to source some period bits ‘n’ bobs to finish.

If anyone has any information on the original owner, Barry Perry (from Bournemouth), please get in touch.

image6 image5 image4 image3 image2

UPDATED 10/11/2016

I received an update this week from Robin…

Have finally got round to getting SP 4136 back on the road. Sourced a period dura ace rear mech from Hilary Stone and just got other bits to finish. Went for a gentle ride Sunday, well to start with. Didn’t know if the tubs would stay on the rims. They did and 13 miles later what a lovely ride it is. So much more compliant than the carbon. Need to get some other bits which I hope to see next summer at Eroica Britannia.

Some pics from the ride.

image1-2 image2-2